Lock And Reset Button Function - Heat Controller B-VCH12FC-1 Owner's Manual

Owner's Manual

LOCK AND RESET BUTTON FUNCTION

Clock
CAUTIONS
Static electricity or other factors (in case of extremely high voltage) can
cause remote controller clock initialize. If your remote controller is
initialized (flashing of the colon in "0:00"), readjust the clock before you
start operation.
AIR ECONOMIC
DIRECTION RUNNING
OK
SWING
TIMER ON
CANCEL
CLOCK
TIMER OFF
TIME ADJUST
1 2
VCH SerieS
2.OK button.
When you push the OK button, the clock time
display stops flashing and the clock starts
operating.
3.Readjusting the Clock
Push the CLOCK button in the battery
compartment, the colon in the clock display will
start to flash.
To set the new time, follow 1 and 2 of "Initial
Setting of the Clock".
*Clock accuracy is within 10 seconds per day.
1. Use the lock mode when you want to
prevent settings from being changed.
Push the LOCK button again when you
want to cancel the LOCK mode.
2. When you push the RESET button,
all current settings are cancelled and
the remote defaults back to the factory program.
8
Heat Controller, Inc.