Table of Contents
Advertisement
SGH-E810 Flow Chart of Troubleshooting
2. System Initial
Initial Failure
The pin #9 of U100 = 1.8V
and pin #11 of U100=2.8V?
Is the pin #19 of U100
" Low --> High" ?
There is 32.768KHz wave
form at the C327, C328 ?
Is the pin #25 of U100
is High ?
The voltage is "High"
at the C107,C109,C110 ?
LCD Display OK ?
Sound operation OK ?
END
YES
YES
YES
YES
YES
YES
YES
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Check the U100
NO
(If it has some problem,
it has to be replaced.)
Check the U100
NO
(If it has some problem,
it has to be replaced.)
NO
Check the U304
NO
Check the U300
NO
Check the U100
NO
Check the LCD part
NO
Check the Audio part
2-2
Advertisement
Table of Contents
