Care, Inspection, And Service - Bradford White Brute Elite BNTH1000 User Manual

Page 10
GENERAL CARE
Keep the area around the Brute Elite clear and free from combustible materials, gasoline
and other flammable vapors and liquids. Clean the jacket surfaces with a damp cloth
and mild soap. Do not use flammable cleaning materials. Keep the vent terminal free of
obstructions. Do not pile snow against the vent terminal.
ANNUAL INSPECTION AND SERVICE
You should visually inspect the vent pipe once a year. Should any corrosion or leaks
exist, have the affected parts replaced.
Once each year a qualified service agency should conduct a detailed inspection of all flue
product carrying areas of the boiler and vent system. Follow the service instructions in
the "Installation and Operating Instructions Manual" for the Brute Elite.
Caution
Do not use this boiler if any part has been under water.
Immediately call a qualified service technician to inspect the
boiler. Any part of the control system and any gas control which
has been under water must be replaced.
WARNING
If the unit overheats or the gas supply fails to shut off, do
not turn off or disconnect the electrical supply to the pump.
Instead, shut off the gas supply at a location external to the
Brute Elite.
En cas de surchauffe ou si l'admission de gaz ne peut être
coupée, ne pas couper ni débrancher l'alimentation électrique
de la pompe. Fermer plutôt le robinet d'admission de gaz à
l'extérieur de l'appareil.
FOR SERVICE
Contact your installing contractor, gas utility, Bradford White dealer, or check
www.Bradfordwhite.com for the nearest authorized representative in your area.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Ambler, PA 19002
Tech. Service (800) 334-3393
Service Parts (800) 538-2020
Warranty Service (800) 531-2111
Bradford White Corp.
www.BradfordWhite.com
Litho in U.S.A. © Bradford White 1209 Document 1267