Removing The Transformer Stand - Lenovo S40–40 Hardware Maintenance Manual

Step 5. To reattach the monitor stand, insert the two tabs
slots in the chassis and slide the monitor stand in and down as shown.

Removing the transformer stand

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches
or other damage.
Step 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right views"
and "Rear view" for help with locating the various connectors.
1 on the monitor stand into the corresponding
Chapter 8
31
.
Replacing hardware