How To Use The Fingerprint Reader - Panasonic CF-T8 Series Supplementary Instructions Manual

How to Use the Fingerprint Reader

This section explains how your fi ngerprints are enrolled and authenticated.
1
Slide your fi nger toward yourself.
To prevent a reading error.
A Set the fi rst joint of your index fi nger on the sensor as illustrated to the left.
B Slide your fi nger toward yourself while keeping it in contact with the
fi ngerprint sensor.
C Slide your fi nger down until the sensor is visible.
When the fi ngerprint sensor does not enroll or authenticate your
fi ngerprint properly:
• You slid your fi nger too fast or too slow.
• Your fi nger was soiled or it has a scar on the surface.
• Your fi nger was wet or extremely dry.
• Your fi ngerprint does not have suffi cient data for personal identifi cation.
For further information, refer to "Troubleshooting (For Devices)".
( page 13)
NOTE
It is strongly recommended to enroll at least two fi ngers.
CAUTION
We shall not be liable for any loss or damage whatsoever resulting
from your Fingerprint device or neglect of Fingerprint device use, or
any data loss resulting from such developments as Fingerprint au-
thentication device malfunctioning.
OK NG
3