Tie Added Number - Panasonic KX-TD816CE Installation Manual

System Programming
Description
Selection
Default
Programming
Conditions

TIE Added Number

Assigns the added number to the TIE subscriber number which is
determined in program [434] "TIE Subscriber Number Removed
Digit". This makes the final number which serves as the extension
number. Note that digits are inserted at the beginning of the
number.
• TIE table number: 1 to 4
• Number to be added: 4 digits (max.)
All DID / TIE tables – Not Stored
1. Enter 435.
Display: TIE Add Dial
2. Press NEXT.
Display: Table NO?→
3. Enter a TIE table number.
To enter TIE table number 1, you can also press NEXT.
Display example: 1:2
4. Enter the number to be added.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another TIE table, press NEXT or PREV, or
SELECT and the desired TIE table number.
7. Repeat steps 4 through 6.
8. Press END.
Each added number has a maximum of 4 digits, consisting of 0 through
9.
435
47