Table of Contents
Advertisement
Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure spa base)
SHIPPING INFORMATION
Dimensions:
Weight:
SPA INFORMATION
Overall Dimensions:
Minimum Area Required For Chair Movement:
Empty Weight (Complete): 125lbs (57kg)
Water Fill Line Capacity:
Whirlpool Pump Motor:
Seat Upholstery:
Power Source:
Caution: Pedicure spa must be installed by a licensed electrician and a licensed plumber,
conforming to all local and national electrical codes
Construction:
®
Pipe-Free
Technology:
Electrical Switches:
Compliances:
Limited Warranty:
NOTE: Due to our policy of continuous improvements, all specifications are subject to change without notice.
Document ID: 39080000
P
S
EDICURE
PA
48"L (165cm) x 40W (84cm) x 41"H (104cm) – includes Spa, carton, and pallet
140 lbs. (117 kg) - includes spa, carton, pallet
66"L (152.4cm) x 27"W (68.6cm) x 49"H (125cm)
66"L (168cm) x 40"W (101cm) x 49"H (125cm)
4.5-5.5 U.S. gallons to accommodate 5'1" to 6'8" Clients
1/6 HP, 110V, 60Hz
Polyurethane
110V AC, 2.75 Amps, 60 Hz (GFCI Protected)
Linear Low Density Polyethylene (LLDPE)
No closed loop circulating pipes, fully drained, easy to clean and sanitize.
On/Off switch for water movement motor. A single hand-held, low voltage
remote control of the massage motors. On/Off for drain is optional.
Tested according to UL 1951:2008, CAN/CSA C22.8 No. 68-92:2006,
ASME/ANSI A112.19.7M:1995, ASTM D2564-84
One (1) year on parts from date of shipment. Labor is not included.
All dimensions and weights are approximate
Rev: C
S
PECIFICATIONS
Technical Support: 1-800-626-6912
Page 9 of 26
Advertisement
Table of Contents
