Pedicure Spa Specifications - European Touch Pedicure Spa Owner's Manual

Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure spa base)
SHIPPING INFORMATION
Dimensions:
Weight:
SPA INFORMATION
Overall dimensions:
Empty weight:
Water Fill Line Capacity: 4.5 U.S. gallons
Motor:
Power source:
Caution: Pedicure spa must be installed by a licensed electrician and a licensed plumber,
conforming to all local and national electrical codes
Construction:
Chair Specifications:
™
Clean Touch Pipe-Free
Electrical switches:
Compliances:
Electrostatic Limits:
Limited warranty:
________________________________________________________________________________________
NOTE: Due to our policy of continuous improvements, all specifications are subject to change without notice.
Document ID: 31080001
P
EDICURE
48"L (122cm) x 40W (102cm) x 32"H (82cm) – includes Spa, carton, and pallet
130 lbs. (286 kg) - includes spa, carton, pallet
27.25"L (70cm) x 23.25"W (59cm) x 18.25"H (47cm)
40 LBS
115V: 1/6 HP, 110V, 60Hz
115V: 115V AC, 2.75 Amps, 60 Hz (GFCI Protected)
OR
230V: 230V AC, 2.75 Amps, 50/60 Hz (GFCI Protected)
Acrylic basin, pre-plumbed
Recommended vertical dimension from seat bottom to basin bottom 14 – 16"
®
Technology: 4 water massage channels, no closed loop circulating pipes, fully
drained, easy to clean and sanitize.
On/Off membrane switch for motor control and optional power drain pump.
Designed to comply with CAN/CSA-E60335-1:1994, CAN/CSA-E60335-2-32:2001,
UL 60335-1:2002, & UL 1647:2001
This unit may lose one or more functions when electrostatic contact discharge in
excess of 4KV gets into accessible conductive part of the unit and could be restored
by resetting the unit.
This unit may lose one or more functions when power surge in excess of 2KV is
applied to the AC input power port and could be restored by resetting the unit.
This unit may lose one or more functions when subjected to fast transient voltages in
excess of 0.5KV at 5 KHz repetition frequency and could be restored.
One (1) year on parts from date of shipment. Labor is not included.
All dimensions and weights are approximate
Rev: B
S S
PA PECIFICATIONS
Technical Support: 1-800-626-6912 Page 9 of 16