Table of Contents
Advertisement
Table 5. Performance, physical, environmental, and power specifications for the 2109 Model
F16 switch
Performance specifications
Routing capacity
Latency
Physical specifications
Enclosure
Height
Width
Depth
Weight
Environmental specifications
Temperature (operating)
Temperature (nonoperating)
Vibration (operating)
Vibration (nonoperating)
Humidity (operating)
Humidity (nonoperating)
Altitude
Shock
Power specifications
Supported power
Range
Frequency
Power consumption
Appendix B. Interoperability, reliability, serviceability, and specifications
A minimum aggregate routing capacity of ten
million frames per second is provided for
Class 2, Class 3 and Class F frames in a
16-port switch.
The maximum latency for Class 2, Class 3
and Class F frames from input F_port to
output F_port within a single switch is less
than two microseconds when the destination
port is free.
Cut-through routing: transmission can begin
as the frame arrives.
Same latency as the 3534 and the 2109
series of switches.
1U, 48.26 cm (19 in.), EIA compliant
Power from rear
Air flow back to front
4.33 cm (1.72 in.)
42.86 cm (16.87 in.)
62.23 cm (24.5 in.)
Single power supply: 10.65 kg (23.5 lbs)
Dual power supply: 12.7 kg (28 lbs)
10° - 40°C (50° - 104°F)
10° - 52°C (50° - 126°F)
5 G, 0 - 3 kHz
10 G, 0 - 5 kHz
8% - 85% noncondensing at 40°C (104°F)
8% - 85% noncondensing at 40°C (104°F)
Up to 3000 m (9800 ft) above sea level
4 G, 11 ms_sine low impulse
Nominal: 115 - 230 V ac contiguous
Operational: 85 - 264 V ac
47 - 63 Hz
90 W maximum
25
Advertisement
Table of Contents
