Table of Contents
Advertisement
Cloud Pak for Data System 100G spine
switch hardware specifications
Hardware specifications below provide information for Cloud Pak hardware, including
dimensions, electrical power and cooling.
All component installation documents are available on the Safety and Regulatory CD
that comes with your Cloud Pak for Data System components.
3454-CAC, Cloud Pak for Data System Spine Switch (100G switch) [see Notes 1, 2]
Table 1
Width
Depth
428 mm
686 mm
(16.84 in)
(27.0 in)
Notes:
[1] The power supplies automatically accept any voltage within the 200-240 V AC,
50/60 Hz rated-voltage range. If dual power supplies are installed and operating, the
power supplies draw approximately equal current from the utility (electrical supply) and
provide approximately equal current to the load.
[2] Power draw and heat load vary greatly by configuration and workload. When you
plan for an electrical system, it is important to use the maximum values but actual power
and cooling will be less.
© Copyright IBM Corporation 2020, 2021
EIA
Height
Weight
units
43.8 mm
11.1 kg
1
(1.72 in)
(24.5 lb)
Amperage
(Max)
2.3 amps
Customer Install Guide, 100G Switch
Power
Cooling
(Max)
(Max)
460
1570
watts
BTU/Hr
15
Advertisement
Table of Contents
