Cut the plastic tie holding the head
panel to the frame.
Untie the hand pendant twist ties.
Press HILO UP button on the hand
pendant.
1-150-068-A CS Bed Manual.doc
Cut the plastic tie holding the knee-foot
panel to the frame.
Carefully cut the untrimmed plastic tie
securing the mains power cable bundle.
After bed is raised, untie the twist ties
on the wall bumper.
© Carroll Healthcare Inc.
Unpacking Instructions
Untie the mattress keepers.
Plug power cord into a properly
grounded 120V~
Rotate the wall bumper to the floor at
the head end of the bed.
Page 14 of 35