Safety - Kambrook KFP100 User Manual

At Kambrook, we believe that safe performance is the first priority in any consumer product
so that you, our valued customer can confidently use and trust our products. We ask that any
electrical appliance that you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
IMPORTANT SAFEGUARDS FOR YOUR KAMBROOK DUAL FOOD PROCESSOR & BLENDER
• Carefully read all instructions before operating
the Kambrook Dual Food Processor & Blender for
the first time and save for future reference.
• Remove and safely discard any packaging
material and promotional labels before using the
food processor for the first time.
To eliminate a choking hazard for young children,
•
remove and safely discard the protective cover
fitted to the power plug of this appliance.
Do not place the food processor near the edge
•
of a bench or table during operation. Ensure the
surface is level, clean and free of water and other
substances.
Do not use the food processor on a sink drain
•
board.
Do not place the food processor on or near a hot
•
gas or electric burner, or where it could touch a
heated oven.
Handle the food processor and attachments
•
with care – remember the blades and discs are
razor-sharp and should be kept out of the reach
of children.
• Use the blade protector when storing the
processing blade.
Always ensure the food processor is completely
•
assembled before operating. The appliance will
not operate unless properly assembled.
• Ensure the Speed Selection dial is in the 'OFF'
position and the food processor is switched off at
the power outlet and the power cord is unplugged
before attaching the processing blade, discs or
processing lid.
Always secure the processing bowl onto the
•
motor base before attaching the processing blade
or discs.
KFP100_FOODPROC_IB_FA.indd 2
KAMBROOK SAFETY
• Ensure the blender/processor lid is securely
locked in place before operating.
Before using the processor ensure that the
•
blender drive cover is in place.
Do not remove blender jug or processing bowl
•
from the motor base whilst blender/processor is
in operation.
Do not push food into the food chute with your
•
fingers or other utensils. Always use the food
pusher provided.
Keep fingers, hands, knives and other utensils
•
away from moving blades and discs.
Do not place hands or fingers into the blender
•
jug or the processing bowl of the food processor
unless the motor, blender blade, processing blade
and discs have come to a complete stop. Ensure
the Speed Selection dial is in the 'OFF' position
and the appliance is switched off at the power
outlet and the power cord is unplugged before
removing the lid from the food processor bowl or
the blender jug.
Ensure the motor and blades or discs have
•
completely stopped fore disassembling. Ensure
the Speed Selection Dial is in the 'OFF' position
and the appliance is switched off at the power
outlet and the power cord is unplugged from
the power outlet before attempting to move the
appliance, when not in use, if left unattended and
before disassembling, cleaning or storing.
Do not use attachments other than those provided
•
with the food processor.
Do not attempt to operate the food processor
•
by any method other than those described in
this booklet.
Care should be taken when removing the food
•
from the processing bowl by ensuring the motor
2
29/5/09 4:27:53 PM