Pirelli Discus DP-L10 User Manual page 77

- WPA-PSK TKIP= WPA key setting
- WPA2-PSK AES=.WPA2 key setting
2. Select WEP key 1/2/3/4, depth of the encryption, and input the key
until it is done.
3. Select WPA or WPA2 key for input.
4. Press Red key
completed, you will see the display of WLAN signal strength and "VoIP
unregistered" in the idle mode.
- EAP-TLS: press
options are displayed.
Under Certificates list you can select the target certificate.
Under Encryption you can activate WEP or WPA-TKIP or WPA2-AES
encryption.
- Scan Period: press
the scans. You can delete the scans number by pressing the
soft key
- IP settings: IP address of the phone. To assign a static IP address turn
the DHCP off
- You can choose the Automatic option to let the phone receive
addressing from the WLAN-AP, or choose the Manual to set the IP
address by hand or choose the DHCP options.
Please refer to your Service Provider for further information.
to end the WLAN settings. If all inputs are
OK key . TheCertificates list
OK key . In the input area type the number of
. Select save to apply the value entered.
Chapter
and Encryption
Right
77
8