Pirelli Discus DP-L10 User Manual page 63

In POP3 server: the POP3 server address for incoming mail; (e.g.
POP3.yahoo.com)
POP3 user name: typically coincides with the e-mail address or with
the user part of the address
POP3 password: input the password for mail access (appears as
'******')
Leave copy: <on> leaves a copy of the downloaded mails on the
server for successive access (e.g. from a PC); <off> disables this
option. Warning: all mails downloaded to the phone will only be
readable via the phone menu.
Polling interval: 'manual' enables the manual retrieve of mails
'5 minutes' (automatic retrieve every 5 min)
'30 minutes' (automatic retrieve every 30 min)
'60 minutes' (automatic retrieve every 60 min)
'2 hours' (automatic retrieve every 2 hours)
'3 hours' (automatic retrieve every 3 hours)
'4 hours' (automatic retrieve every 4 hours)
'12 hours' (automatic retrieve every 12 hours)
Other settings
Incl. signature
Use SMTP auth: (<yes> enables authentication on the SMTP server)
SMTP user name: (to be input if <yes> was selected in the previ-
ous menu)
SMTP password: (to be input if <yes> was selected in the previ-
ous menu)
Out (SMTP) port: TCP port of the mail server – default = 25
In (POP3) port: TCP port of the mail server – default = 110
Reply-to address
Retrive e-mails (default = 10)
Data bearer: 'GPRS' enables connection over GPRS; 'WLAN
only'enables connection over WLAN
Bearer settings
• Access point
• Authentication type ('Normal' or 'Secure')
• Username (input only if 'Secure' authentication type is
selected)
• Password (input only if 'Secure' authentication type is selected)
SMTP connection settings
• Proxies (Enable, disable)
• Primary proxy (input Primary proxy name)
POP3 connection settings
Chapter
63
5