Toshiba Satellite P100 Series Maintenance Manual page 231

Replacement Procedures
8. Remove the following screws securing the LCD unit.
•
9. With the bottom edge of the LCD unit on the display cover, lift only the top edge of
the LCD unit. After peeling off the CONDUTIVE tape, disconnect the LCD harness
from the connector on the back of the LCD.
10. Remove the LCD unit.
M2.5X4.0 BINK HEAD
4-54
M2.5x4.0 BINK HEAD screw
LCD unit
LCD harness
Figure 4-33 Removing the LCD unit
x6
M2.5x4.0 BINK HEAD
CONDUTIVE tape
Satellite P100 Maintenance Manual (960-Q02)