Manually Installing The Wireless Cardbus Adapter - IBM 11a Quick Start Manual

Automatically installing the wireless cardbus adapter
The automatic installation process includes installing the device drivers for
your operating system and the Wireless LAN Manager Utility. To perform an
automatic installation, do the following from the computer desktop:
1. Insert the Installation CD into the CD-ROM drive.
2. Click Start →Run .
3. In the Open field, type d:\setup\setup.exe /s /f1setup.iss, where d: is
the CD-ROM drive.
4. Following the instructions on the screen.
5. Insert the PC CardBus Adapter into the PC CardBus slot on your computer
as shown in the illustrations below.
6. Restart the computer after the installation completes.
Note: After restarting your computer, you will be required to configure
your adapter. For more information, See "Chapter 4. Configuring the
adapter" in the User's Guide on the installation CD.

Manually installing the wireless cardbus adapter

To install the IBM 11a Wireless LAN CardBus Adapter, do the following:
1. Turn on the computer and wait for the operating system to start.
2. Insert the IBM 11a Wireless CardBus Adapter into the PC Card slot on your
computer as shown in the following illustrations.
2-2
IBM 11a Wireless LAN CardBus Adapter: Quick Start Guide