Advertisement
6.1
E-10
System-specific parameters
For each day of the week, it is possible to select
whether Time1, Time2, no time or both times
are to be active for a dynamic cooling block.
Has the system got silent (dew point-controlled)
cooling?
Sets the room set temperature for silent cooling
The actual value is measured by room climate
control station 1
Rise in the minimum flow temperature
calculated from the measured values from the
room climate control station during silent
cooling. A raised value reduces the risk that
condensate will form.
Setting of the external temperature below
which the cooling operation is terminated in the
case of reversible HPs.
Sets DHW preparation
The hysteresis of the hot water set temperature
forms the neutral zone below which a request
for domestic hot water will be issued.
Sets the desired hot water temperature
Sets the time programs for hot water blocks
Sets the times in which DHW preparation is
blocked
For each day of the week, it is possible to select
whether Time1, Time2, no time or both times
are to be active when the temperature is
lowered. Operations to lower the temperature
that exceed a weekday are activated or
deactivated at the end of each day accordingly.
Thermal disinfection is executed via the flange
heater at the set start time. The heating period
is terminated automatically when the set
temperature is reached or after 4 hours at the
latest.
Setting range
Display
N
Cooling function
T1
Dyn. cooling
T2
Y
Yes
Cooling function
No
15 °C
Cooling function
... 20 °C...
Silent cooling
30 °C
1.5 K
Cooling function
... 2.0 K ...
Silent cooling
5.0 K
-10.0 °C
Cooling function
... 15.0 °C ...
35.0 °C
Domestic hot water
Sensor
2 K
Domestic hot water
...
Sensor
15 K
30 °C
Domestic hot water
... 45 °C ...
Sensor
85 °C
Domestic hot water
Sensor
00:00
Domestic hot water
...
Sensor
23:59
N
Domestic hot water
T1
Sensor
T2
Y
Domestic hot water
Sensor
Flange heater
Advertisement
Chapters
