Program; What Is "Program; Switching To Thumbnail Display Of Specific Date (Select) - Hitachi DZ-GX3300E(SW) Instruction Manual

Program

WHAT IS "PROGRAM"?

Program refers to an assembly of scenes recorded on the same date regardless of whether they are
movie or still.
Scene No. 1 Scene No. 2

SWITCHING TO THUMBNAIL DISPLAY OF SPECIFIC DATE (SELECT)

Since the scenes recorded on this DVD video camera/recorder are collected as "programs" for each
recording date, selecting a program will allow you to display only the scenes on a specific date.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the / / /
choose "Select" on the "Program" menu
screen, and then press the
4
Select the program to
be displayed, and then
press the button.
The Disc Navigation
screen of the selected
program will appear.
88
Scene No. 3 Scene No. 4
Note
• Pressing the
will restore the Disc Navigation screen.
• If a disc recorded on another device is loaded in this
DVD video camera/recorder, the program may not be
/ buttons to
a collection of recordings on the same date.
• If you change the video quality or switch the wide
button.
mode with a +RW, multiple programs will be produced
even if they are recorded on the same date.
S e l e c t P r o g r a m
A l l P r o g r ams
0 1 30 / 8 / 2 0 0 6
0 2 10 / 9 / 2 0 0 6
0 3 30 / 9 / 2 0 0 6
ENTER RETURN
0 3 30 / 9 / 2006 0 01 / 008
PLAY
Scene No. 5
:
button on the "Select Program" screen
Scene No. 6