Table of Contents
Advertisement
Message
Card error has
The card may be damaged: Use another card.
occurred.
Formatting is not
complete.
Card error has
Card error could have occurred during editing of scenes. Turn off
occurred. Keep card
the DVD video camera/recorder with the card being used inside,
inside & restart.
connect the AC adapter/charger, and then power the DVD video
camera/recorder again.
Card full.
Delete unnecessary stills and try the card, or use another card.
No more recording on this card can be done: Delete unnecessary
stills or use another card.
Card is not formatted.
Was the card formatted on PC? When using the card on this DVD
Format the card now?
video camera/recorder, choose "YES" and format it.
CHECK DISC
A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged.
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
Control Information
Mismatch may occur between the recorded image and scene
Error.
information.
Update the control information.
• Use another disc.
• See *3 and *4 on page 138.
COPY PROTECTED
The video signal input to this DVD video camera/recorder may be
copy-guarded.
Some prerecorded video materials, such as movies, are guarded
against copying.
Copy-guarded materials cannot be recorded on this DVD video
camera/recorder.
DISC ACCESS
The recorded scene is being stored on disc.
This DVD video camera/recorder is verifying whether the correct
disc has been inserted.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
Disc error has occurred.
• Disc error occurred during finalizing, and finalizing failed.
Finalizing is not
Replace the disc.
complete.
• See *3 on page 138.
Disc error has occurred.
• Has the disc been initialized on PC? Has initializing the disc on
Format the disc now?
PC been interrupted?
Choose "YES" and initialize the disc when using it on this DVD
video camera/recorder. Initializing the disc will erase all data on
it.
• See *2 on page 138.
Disc error has occurred.
The disc may be dirty.
Formatting is not
Remove the disc and wipe off fingerprints, dust, etc. before
complete.
reusing it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
134
Cause & Troubleshooting
Reference
page
24
25, 30
78, 152
98
24, 99
100
—
109
40, 41
145
101
98
9, 98
Advertisement
Table of Contents
