Activating And Committing A Configuration - D-Link NetDefend DFL-210 User Manual

2.1.5. Working with Configurations
Example 2.10. Activating and Committing a Configuration
This example shows how to activate and commit a new configuration.
CLI
gw-world:/> activate
The system will validate and start using the new configuration. When the command prompt is shown again:
gw-world:/> commit
The new configuration is now committed.
Web Interface
1. Go to Configuration > Save and Activate in the menu bar
2. Click OK to confirm
The web browser will automatically try to connect back to the web interface after 10 seconds. If the connection
succeeds, this is interpreted by NetDefendOS that remote management is still working. The new configuration is
then automatically committed.
Note
All changes to a configuration can be ignored simply by not committing a changed
configuration.
Chapter 2. Operations and Maintenance
20