Setting Up An Access Rule - D-Link NetDefend DFL-210 User Manual

6.1.3. Access Rule Settings
of this. It is always advisable to check Access Rules when troubleshooting puzzling problems in
case a rule is preventing some other function, such as VPN tunnel astablishment, from working
properly.
Example 6.1. Setting up an Access Rule
A rule is to be defined that ensures no traffic with a source address not within the lannet network is received on
the lan interface.
CLI
gw-world:/> add Access Name=lan_Access Interface=lan Network=lannet Action=Except
Web Interface
1. Go to Rules > Access
2. Select Access Rule in the Add menu.
3. Now enter:
• Name: lan_Access
• Action: Except
• Interface: lan
• Network: lannet
4. Click OK.
104
Chapter 6. Security Mechanisms