Operation; Start Up - Taikan OT-860-1550-xx-SA-x-x User Manual

SECTION THREE

// OPERATION

1
ON/OFF KEY BUTTON
After powering on the transmitter from the back panel, press the On/Off button to activate the
transmitter.
2
STATUS INDICATOR ( A GREEN LIGHT DENOTES ACTIVITY)
> Laser – Laser status
> RF – RF status
> Temp – System temperature
> Power 1 – Furthest power outlet on the back panel
> Power 2 – 2nd power outlet on the back panel
3
DISPLAY
LCD displays selected menu items and warnings.
4
DIRECTIONAL ARROWS
Select these buttons to toggle through each main menu category. ▲ ▼
5
SELECT BUTTON
Press the button once to toggle through the various subcategories. Press it again to select the
setting you would like and return to the main menu.
6
OMI, AGC & MGC STATUS INDICATOR
> AGC – Automatic gain control
> MGC – Modulation gain control
> OMI – Optical modulation intensity
7
MODULATION DEPTH INDICATOR LIGHT
8
RF TEST PORT
Taikan // 919 E. 29th St. Lawrence, KS 66046 // tel: 1-800-255-0247 // fax: 785-841-9512 // email: support@taikan.com // www.taikan.com

START UP

1 TURN ON THE POWER SWITCH ON THE REAR PANEL
Turn the optical power on from the front panel On/Off key. Wait a few seconds for the transmitter
to do a self check. After the check is complete the screen will display a welcome message with the
product model indicated.
2
STATUS LAMPS SHOULD REFLECT THE FOLLOWING
> Laser – Green
> RF – Green
> Temp. – Green
> Power – Green
3
ACCESSING THE MAIN MENU
To access the Main Menu, use the arrow buttons on the front panel and toggle through the
options listed on the next page.
4
ACCESSING THE SUB MENU
To access the Sub Menu stop on the main menu topic you would like to view and press the
'Select' button.
To exit out of the Sub Menu press the select button a 2nd time. Please note that pressing the
'Select' button a second time saves the changes you have made.
5 MENU DEFINITIONS*
> Main Menu –
> Descriptor –
> Serial Number –
> Model Number –
> Output 1 –
> Output 2 –
> LD S/N –
> Laser Current –
> Laser Temperature –
> TEC Current –
> RF Mode –
> OMI Adjust –
> RF Level –
> SBS –
> SBS State –
> CSO State –
> Date –
> Version –
> System Temperature –
> Voltage Monitors (5,-5,24V) –
> IP –
> Sub –
> GW –
> TR1 –
> TR2 –
*Information above is for reference only. The data will vary by unit.
Default Description
Equipment model
438292F
10020476
Displays current output
Displays current output
204188
00mA
24.6 °C
0.09 A
AGC (press 'Select' to change and toggle through the options)
0.5 dBm (press 'Select' to change and toggle through the options)
OK
OK
OK
OK
Displays date
08.05
Refl ects current temperature
-5, 5, 24V
192.168.000.012
255.255.255.000
192.168.000.001
192.168.006.144
192.168.006.144
1550nm Transmitter | 11