13.
ASSEMBLY HINTS
1. Nokia N810 Assembly hints.
3. Insert the new screws. Tighten them with a torque of 18Ncm
in the order shown.
5. Check the correct positioning of the TOP KEY FLEX ASSEMBLY.
7. When replacing the keymat, check that the QUERTY COVER fits
into its guide correctly. Smooth down all clips evenly.
Page
16
(16)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
2. Insert the 2 new screws of the STANDING SUPPORT. Apply a
torque of 18Ncm to these screws.
4. Check that the double side adhesive tape was fitted before
when placing the TOP FLEX ASSEMBLY. Mind the guides.
6. Insert and thighten the new screws with a torque of 15Ncm
in the order shown.
8. Place the DECORATION COVER ASSEMBLY, starting with the rear
clips. Gently push the shown clips into their places.
N810 RX-44
Service Manual Level 1&2
ISSUE 1