Approval; Ce Declaration; Warranty - Handicare IBIS XP User Manual

Introduction

Approval

The product meets the following
standards:
1. EN12184 (1999) Electrically driven
wheelchairs and scooters, class B.
2. ISO7176-8 Requirements for
impact, static and fatigue strength.
3. ISO7176-9 Climate tests for
electric wheelchairs and scooters.
4. ISO7176-14 Standards and test
methods for controller systems of
electrically driven wheelchairs.
5. ISO7176-16 Requirements of
resistance to fire.
6. ISO 7176-19 Crash test.
The product is EMC (Electro Magnetic
Compatibility) approved in accordance
with EN12184 (1999).

CE declaration

The product is in conformity with the
provisions of the Medical Devices
Directive and thus has CE marking.

Warranty

In the following warranty and liability
stipulations the terms and definitions
as summed up hereafter must be
explained as follows:
Product: The hand-operated or

electric wheelchair or scooter
manufactured and delivered by
Handicare.
 Customer: The person who directly
obtains a Product from Handicare.
 Dealer: The person who delivers a
Product obtained from Handicare to
customers or third parties.
 User: The person who uses a
Product manufactured by
Handicare.
8
Irrespective of what is determined
concerning warranty conditions
applicable to the Product, in any case
the following applies with regard to the
warranty:
1. Except insofar as described
otherwise Handicare guarantees
the Product for its suitability for the
purpose for which the Product is
intended - all of these points as
described in this manual - and for
the quality of the material of which
the Product is made and the
manner in which the Product is
manufactured.
2. Repairs or replacement of parts of
the Product that may be necessary
as a result of faults that are based
on qualitatively faulty material or
manufacturing errors will be
executed free of charge, as long as
such faults occurred within one (1)
year after the date of delivery of the
Product to the Customer. The parts
to be replaced must be shipped
post-paid to Handicare.
Disassembly or assembly of these
parts is for the expense of the
Customer. Therefore the following
cases are not eligible for free repair
or replacement as meant above:

The repair or replacement that
is necessary in connection
with faults that arise after one
(1) year after the date of
delivery of the Product to the
Customer;

The repair or replacement that
is required in connection with
faults due to improper or
careless use of the Product or
that are based on the Product
being used for another
purpose than the one for which
it is intended, in which regard it
applies that if the Customer is
a Dealer, this Dealer will
indemnify Handicare against