Handicare IBIS XP User Manual page 22

Operating instructions
Controller 'swing-away'
Height
1. Loosen the setscrew (A) a few
turns with a 3 mm Allen key.
2. Slide the controller with the swing-
away mechanism in the desired
position.
3. Tighten the setscrew securely.
Depth
1. Loosen the setscrew (B) a few
turns with a 4mm Allen key.
2. Slide the controller in the desired
position.
3. Tighten the setscrew securely.
Anti-tip brackets (option)
Anti-tip supports are mounted on the
XP wheelchairs as an extra safety.
The anti-tip supports limit the
possibilities of taking obstacles with a
wheelchair.
There is an alternative way of
mounting the anti-tip supports, in a
higher position. Be careful! The
anti-tip supports make a safety
system. Changes to safety systems
can lead to dangerous situations! In
this case a higher position of anti-
tip supports has a negative
influence on the stability!
22