Purpose Of This Manual; System Description - Allpro ScanX-12 DVM Instruction Manual

IMPORTANT INFORMATION
Correct Usage
 Operation of the ScanX may only be carried out by suitably qualified
personnel.
 The ScanX is only to be used in the processing of exposed PSPs.
 The ScanX should be used in a room equipped for it.
 Room temperature should be in the range 50 to 105°F (10 to 40°C)
with relative humidity between 5 and 95%.
 If the device is brought into the room of operation from a cooler
environment, condensation can build up. Do not connect the device until
it has warmed up to room temperature and is absolutely dry.
 This room should be free of all possible interferences (e.g. strong magnetic
fields), as these could affect the operation.
 The ScanX may only be operated together with authorized software such as
Visix or VetRay Imaging Software.
 Correct usage includes observing all installation and operating instructions
and adherence to the set-up, operation and maintenance instructions.
 Any use, above and beyond that described in this manual as correct
usage, will invalidate the warranty.
Incorrect Usage
 Any use that is not described in this manual as correct usage is considered
as incorrect usage. The manufacturer is not to be held liable for any damage
caused as a result of incorrect usage. The operator bears all risks.

PURPOSE OF THIS MANUAL

This manual provides the information necessary for the setup, operation and routine
care and maintenance of the the ScanX
DVM (P/N B7150) Digital Imaging Systems with In-Line Erase.
This manual is not to be used as a replacement for training in radiography.
For information regarding the computer system and imaging software, refer to the
appropriate documentation provided with your computer hardware and software.

SYSTEM DESCRIPTION

The ScanX is a d igital radiography system that utilizes reusable Phosphor
Storage Plates (PSP) in place of X-ray film to produce diagnostic quality intraoral
and extraoral digital radiographs. The ScanX produces a digital image by scanning
PSPs, which have been exposed to X-rays. The ScanX allows computer storage,
processing, retrieval and display of the computed radiographic images utilizing
a user supplied software and computer. An additional feature of the ScanX con-
sists of an in-line plate eraser function that removes the latent image from the
plate immediately after scanning. This design provides an efficient one-opera-
tion scanning and erasing process leaving the user with a PSP ready for the next
X-ray procedure.
®
-12 DVM (P/N B7350) and the ScanX
8
®