Adjustment Options (Dealer) - Handicare IBIS User Manual

Operating instructions
3.10 Adjustment options
(dealer)
The seat tilt range can vary
depending on the way the
wheelchair is adjusted.
Seat height
Before adjusting the seat height,
remove as many heavy seat parts as
possible (seat, backrest, etc.) to limit
the weight to be lifted.
1. Loosen the 4 bolts (A) using a 13
mm spanner, and remove them.
2. Lift the seat post off the bracket (B)
and place it back in the desired
position on the bracket.
3. Tighten the bolts (A) securely.
Seat angle
1. Tilt the seat with the seat tilt
adjustment, so that the adjusting
plate becomes free.
2. Loosen the bolt (A) with a 4 mm
Allen key, and remove it.
3. Loosen the bolt (B) a few turns.
4. Turn the plate © in the desired
position (angle).
5. Tighten both bolts (A and B)
securely.
Frame width (20"/22"/24")
1. Loosen the bolts (A) with a 13 mm
spanner and remove them.
2. Put the frame tube (B) in the
desired position, so that the holes
are level with the frame.
3. Tighten the bolts (A) securely.
38