Propulsion Options - Invacare Action 3 User Manual

2.6.2 Propulsion options

- Transit version (photo 28) : the wheelchair is designed to be
driven only by the attendant. To facilitate sideways transfers
and save space, the wheelchair is equipped with rear wheels
of 12" (315 mm) with pneumatic or solid tyre.
The manual brakes (optional hub brake) are only accessible to
the attendant; operate the handle (A) to lock the wheelchair
in parking position.
Note : for further information about the use of the two
types of brakes, see paragraphs 2.5.1 & 2.5.2.
28
A
28
- One arm lever drive (photos 29) : this control system(left
or right hand) allows the user with low muscular tone to
propel the wheelchair. Using one arm through the lever pen-
dular motion which propels it forward or backward (rever-
sing lever A) and which integrates steering and braking.
The lever can be removed to facilitate transfers or to move
next to a table ; loosen the indexable lever (B) and pull up.
Reverse the procedure to reinstall.
The adjustment of the propulsion force is performed by
moving the transmission link on the pendular motion lever ;
slightly loosen the indexable lever (C), slide down to reduce
the stress, and firmly tighten the lever (C).
!
The manual brake is always located opposite to the
control.
Make sure that the indexable levers are properly positioned
so that they are not bothersome or hurtful for the user and
attendant.
A
B
C
29