CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
0.
ASSEMBLY INSTRUCTION
1. You need the tools shown.
3. Flip the connector plate of the HDD ASSEMBLY. Do not touch the
pads. Fix the connector plate.
5. Note that both snaps are fixed properly.
7. Complete the DC Jack with the SPACER FOR DC JACK.
Service Manual N9 RM-43 / RM-58
Page
9
(34)
CONFIDENTIAL
2. Remove the protection tape from the adhesive. Insert the HDD
ASSEMBLY and fix it. Do not push down the conductive tape .
4. Position the BB UNISHIELD.
6. Place the DC JACK.
8. Push it into its place slightly.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 3.0
MGR
27.Apr.2006