Assembly Instruction - Nokia E65 Service Manual

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
12.

ASSEMBLY INSTRUCTION

1. Needed tools: The SS-93, metal tweezers, a torque driver
with a Torx Plus size 6 bit and a DC plug.
3. Place the flex foil assemblies.
5. Remove all protective films.
Service Manual E65 RM-208
Page 23 (44)
CONFIDENTIAL
2. The SS-110 Alignment tool is also needed for correct
placement of the flex foils.
4. Mind the guide.
6. Bring the slider into position shown.
Copyright © 2007 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
19.Jan.2007