Set Up Your Computer's Ip Address; Windows 2000/Nt/Xp - ZyXEL Communications Zy-Air B-420 Quick Installation Manual

3 Set Up Your Computer's IP Address

Skip this section if your computer's IP address is already in the range of
192.168.1.11 ~ 192.168.1.254 with subnet mask 255.255.255.0.
Your computer must have a network card and TCP/IP installed. TCP/IP should already be installed on
computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. Refer to the Setting
Up Your Computer's IP Address appendix in the User's Guide for other operating systems.

3.1 Windows 2000/NT/XP

1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings,
Control Panel.
2. In Windows XP, click Network Connections.
In Windows 2000/NT, click Network and Dial-up Connections.
3. Right-click Local Area Connection and then click Properties.
4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
5. The Internet Protocol TCP/IP Properties
screen opens (the General tab in
Windows XP).
Configure your computer to use a static IP
address, select Use the following IP
address and fill in the IP address
(192.168.1.1 to 192.168.1.254, except
192.168.1.11) and Subnet mask
(255.255.255.0) fields.
6. Leave the Preferred DNS sever and Alternate DNS server fields blank if you do not know the
IP address(es) of the DNS server.
7. Click OK to close the Internet Protocol (TCP/IP) Properties window.
8. Click OK to close the Local Area Connection Properties window.
ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
7