Operation; Safety Instructions - Becker AR6201 Installation And Operation Manual

Section 3.

OPERATION

3.1

Safety Instructions

For safe operation of the AR6201-X0X takes the following instruction
into account.
Turn the unit "OFF" before starting or shutting down the engine.
Speak loud and clear to the microphone while keeping it always close to
the lips. This ensures a crystal-clear readability of the transmitted
signal at the receiving station.
It is highly recommended to use the same type microphones or headsets,
which are suitable for use in aircrafts.
At power supply voltages below 10 V the speaker output of the
transceiver is automatically switched "OFF", speaker sign will no longer
be presented on LCD display if activated before, the pilot must use
headphones to continue listening watch.
A "LOW BATTERY" message will appear all 3 seconds in the lower part of
the display if "LOW BATT THR" is to a suitable level adjusted within the
supply voltage range.
DV 14300.03/.04 Issue 5 5/2013
AR6201-(X0X)
Page 3-1