Recording According To Tape Type - JVC HR-S9700EK Instruction Manual

Recording
According To
Tape Type
Turn on the TV and select the VIDEO channel (or AV mode).
Super VHS ET (S-VHS ET)
— Recording on VHS tapes
with S-VHS quality
This function allows you to record in SP mode on VHS tapes with
S-VHS picture quality. Tapes recorded using this function can be
played back on a recorder equipped with the S-VHS ET function.
You can activate this function only before you start recording
on a VHS tape.
Before recording, make sure that "B.E.S.T." is set to "ON".
( pg. 38)
ENGAGE S-VHS ET MODE
1
Press S-VHS ET on the recorder's front panel. The S-VHS
ET indicator on the recorder's front panel lights up.
The S-VHS indicator lights up on the front display panel.
To disengage the S-VHS ET mode, press S-VHS ET.
The S-VHS ET indicator goes off.
START RECORDING
2
Press and hold RECORD and press PLAY on the remote
control, or press RECORD on the recorder.
NOTES:
Use of high grade tapes is essential for S-VHS ET record-
ings. On some tapes, picture quality will not improve
even if the S-VHS ET function is used. Check the record-
ing quality before you start important recordings.
You cannot activate the S-VHS ET function ...
... while recording is in progress.
... while timer-recording or Instant Timer Recording
( pg. 17) is in progress.
... while B.E.S.T. ( pg. 38) is in progress.
S-VHS ET does not work ...
... with S-VHS tapes.
... with recordings in LP/EP mode.
To keep the highest quality recording and playback pictures
over a long period of time, S-VHS recording on S-VHS tapes
is recommended.
You can play back S-VHS ET recordings on most S-VHS
recorders and on VHS recorders equipped with SQPB (S-VHS
QUASI PLAYBACK) function. (Notice: some recorders are not
compatible with this function.)
On some tapes noise may appear when playing back a tape
recorded with this function. (If playback picture becomes
blurred or interrupted, use a cleaning cassette.)
In the high-speed search, still, slow-motion or frame-by-frame
playback modes ( pg. 15), noise may appear. If these
modes are used frequently on a tape recorded with the S-VHS
ET function, the tape may be damaged and the picture may
be deteriorated.
Super VHS (S-VHS),
S-VHS ET and VHS
Your recorder can record in S-VHS, S-VHS ET or VHS.
To record in S-VHS:
Perform the steps 1 – 4 below to set "S-VHS" to "ON".
Then, insert a cassette marked "S-VHS", the S-VHS indicator will
light on the display panel.
The S-VHS recording mode will be selected.
To record in S-VHS ET on a VHS cassette:
See "Super VHS ET (S-VHS ET)" in the left column.
To record in VHS:
Insert a cassette marked "VHS".
If the S-VHS ET indicator on the recorder is lit and the S-VHS ET
mode is activated, press S-VHS ET. The indicator goes off.
The VHS recording mode will be automatically selected
regardless of the S-VHS mode setting.
To record in VHS on an S-VHS cassette:
Insert the cassette marked "S-VHS", the S-VHS indicator will
light on the display panel.
Then, perform the steps 1 – 4 below to set the "S-VHS" to "OFF";
the S-VHS indicator will go out.
The VHS recording mode will be selected.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET SCREEN
2
Move the highlight bar
(pointer) to "MODE SET"
by pressing %fi, then press
#
OK or .
SELECT S-VHS MODE
3
Move the highlight (pointer) to "S-VHS" by pressing
%fi, then press OK or
MODE SET
B. E. S. T.
PICTURE CONTROL
AUTO TIMER
O. S. D.
DIRECT REC
AUTO SP=LP TIMER
DIGITAL 3R
NEXT PAGE
[5∞] =
[MENU] : EXIT
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights on the display panel
regardless of the "S-VHS" mode setting.
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
REC LEVEL CTLT
R.A.EDIT
VIDEO NAVIGATION
[5∞] =
[MENU] : EXIT
#
to select "ON" or "OFF".
PREVIOUS PAGE
ON
POWER SAVE
AUTO VIDEO STABILIZER
OFF S-VHS
ON TIME SCAN AUDIO
ON
OFF
ON
[5∞] =
[MENU] : EXIT
37
OFF
OFF
ON
ON