Delete A Channel - JVC HR-S9500EK Instructions Manual

Delete A Channel

Perform steps 1 and 2 of "Storing Channels Manually" on
page 50 to access the Confirmation screen before continuing.
SELECT ITEM
1
Press %fi
until the item you want to delete begins
blinking.
DELETE CHANNEL
2
Press .
The item directly beneath the cancelled one moves
up one line.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Change Station Preset
Position
Perform steps 1 and 2 of "Storing Channels Manually" on
page 50 to access the Confirmation screen before continuing.
SELECT ITEM
1
Press %fi
until the item you want to move begins
blinking. Then press OK and the station name (ID) and
its channel (CH) number begin blinking.
SELECT NEW POSITION
2
Press %fi
to move the station to the new preset
position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
PR CH ID PR
01 26 BBC1 08
02 23 ITV 09
03 30 CH4 10
04 33 BBC2 11
05 37 CH5 12
06 –––– 13
07 –––– 14
[ 5 ∞
] : MOVE
: MANUAL CH SET
[MENU] : EXIT
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
ATTENTION
After you have deleted channels or changed preset positions, be sure to perform Guide Program Number Set (
get proper results from Video Plus+ timer recording.
CH ID
PR CH ID PR
––––
01 26 BBC1 08
––––
02 33 BBC2 09
––––
03 23 ITV 10
––––
04 30 CH4 11
––––
05 37 CH5 12
––––
06 –––– 13
––––
07 –––– 14
[ 5 ∞ ] : MOVE =
[MENU] : EXIT
Fine-Tuning Channels
Already Stored
Perform steps 1 and 2 of "Storing Channels Manually" on
page 50 to access the Confirmation screen before continuing.
SELECT CHANNEL TO FINE-TUNE
1
Press %fi
begins blinking.
ACCESS MANUAL
CHANNEL SET SCREEN
2
Press OK twice. The Manual Channel Set screen
appears.
PERFORM TUNING
3
Press
the picture is clearest. Then press OK.
The Confirmation screen appears.
Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION SCREEN
4
Press MENU.
CH ID
––––
––––
––––
––––
––––
––––
––––
until the channel you want to tune
until "+/–" begins blinking, then press %fi until
pg. 56) in order to
51