Rear View; Display Panel - JVC HR-S8600EK Instructions Manual

REAR VIEW

1 Mains Power Cord supplies power to recorder.
pg. 6, 7
2 S OUT Connector enables S-VIDEO connection to
TV or second recorder.
3 AV1 OUT Switch selects the type of signal output via
the 21 pin AV1 IN/OUT connector.
4 AV1 IN/OUT Connector enables AV connection to
TV or second recorder; input recordable when "L-1"
selected. pg. 6, 38
5 J Terminal (JLIP (Joint Level Interface Protocol)
Connector) enables connection of a personal
computer or similar device to allow computerized
control of the recorder during editing and certain
other operations.
6 SYNCHRO EDIT Connector enables
connection to camcoder equipped with LANC
connector, for easy editing.

DISPLAY PANEL

1 2 3
+ 8
4
0
6
VPS/PDC
15dB
VCR
NORM
9 0 ! @ #
1 B.E.S.T. Picture System Display lights from bottom to
top while B.E.S.T. is active.
Audio Level Indicator displays audio input and
output levels. pg. 28
2 Programme Time Indicators show the programme
start time ( ) and the programme stop time ( ) for
timer-recording. pg. 18
3 Symbolic Mode Indicators
PLAY:
FF/REW VARIABLE
SEARCH:
AUDIO DUBBING:
AUDIO DUBBING PAUSE:
INSERT:
INSERT PAUSE:
AUDIO DUBBING INSERT:
AUDIO DUBBING INSERT PAUSE:
1
pg. 7, 38
pg. 6, 30
pg. 46
pg. 37
4 5 6 7
SP
$ %
pg. 22
STILL:
SLOW:
RECORD:
RECORD PAUSE:
2 3 4 5
AV1 OUT
S OUT AV1 IN/OUT
L
COMP. Y/C
AUDIO
OUT
R
AV2 IN/DECODER
8
7 ANT. IN Connector enables connection of aerial.
pg. 6, 7
8 AV2 IN/DECODER Connector enables connection of
satellite receiver, decoder or second recorder; input
recordable when "L-2" selected.
9 AUDIO OUT (L/R) Connectors enable
connection of audio cassette recorder, TV or second
video recorder for dubbing.
0 Remote PAUSE Connector enables connection to
second recorder equipped with R.A. Edit connector,
or to JVC camcorder equipped with Master Edit
Control, for easy editing.
R.A. EDIT Connector enables connection to second
recorder equipped with Remote PAUSE connector for
easy editing.
! RF OUT Connector enables connection to aerial
terminal of TV receiver.
8 4 "Timer" Indicator lights when ‰ has been pressed to
engage Timer mode.
5 S-VHS Indicator lights when a cassette marked S-VHS
REVIEW
is inserted with S-VHS mode set to "AUTO", and when
an S-VHS-recorded tape is played back.
6 Channel Display shows preset position where the
station currently being received is stored.
Clock Display shows current time.
7 Tape Speed Indicators display mode of recording; light
during Record or Play mode.
* EP is only for NTSC playback.
8 Instant REVIEW Indicator blinks after timer-recording
and shows how many programmes have been timer-
recorded.
9 Audio Mode Indicator displays audio output mode
currently selected.
0 Tape Remaining Time Indicator displays time remaining
on tape when certain buttons are pressed.
! "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
@ PDC Indicator lights when PDC has been engaged
for timer recording.
* VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this recorder.
# VCR Indicator lights when the video recorder is in
the video mode. At this point, the TV automatically
enters AV mode.
$ Counter shows time elapsed since playback or
recording began.
With
current tape position to end of tape (
Counter, Preset Position*, Clock and Tape Remaining
Time Display appear alternately when – –:– –
(DISPLAY) is pressed.
* Preset Position is not displayed during playback.
% Mode shows external input mode selected (L-1, L-2,
F-1 or S-1).
6 7
SYNCHRO EDIT
JLIP
ANT. IN
PAUSE/R.A. EDIT
RF OUT
0
9 !
pg. 51
pg. 36
pg. 42
pg. 6, 7
pg. 17, 19
pg. 25
pg. 29
pg. 17, 19
pg. 12
displayed, shows time remaining from
67
pg. 30, 38
pg. 21
pg. 10
pg. 14
pg. 15
pg. 15).