JVC HR-S7700EK Instructions Manual page 49

– –:– –
3
1 2
2
4
5 6
8 9
7
4
0
?
1
VIEW CONFIRMATION
SCREEN
4
After "SCAN COMPLETED"
is displayed on the screen
for about 5 seconds, a
Confirmation screen
looking like the one on the
right appears. The stations
your recorder located
appear on a Confirmation
screen — preset positions
(PR), channels (CH) and
station names (ID –
and the programme currently being broadcast by the
station which is blinking appear alternately for 8
seconds each.
To view the next page, use the % fi
remote control.
The Guide Program numbers will also be set
automatically during Auto channel Set.
RETURN TO NORMAL
SCREEN
5
Press MENU.
Using the Confirmation screen, you can skip or add
preset positions, enter station names and perform
other operations. Refer to pages 50 – 54 for the
procedures.
Depending on reception conditions, the stations may,
on occasion, not be stored in order, and the station
names may not be stored correctly.
IMPORTANT
In certain reception conditions, station names may not be
stored correctly, and auto Guide Program Number Set
may not work properly. If the Guide Program numbers
are not set properly, when you timer-record a TV
programme using the VIDEO Plus+ system, the recorder
will record a TV programme of a different station. When
programming the timer using the VIDEO Plus+ system,
be sure to check that the preset position corresponding to
the broadcasting station you wish to record has been
selected ( pg. 18, "VIDEO Plus+ Timer Programming").
Your video recorder memorizes all detected stations even
if reception of some of them is poor. In these cases
picture quality may be poor. To delete those stations
which have an unacceptable picture
Channel" on page 51.
NOTES:
Fine tuning is performed automatically during Auto Channel
Set. If you wish to perform it manually, refer to page 51.
If, for any reason, you perform Auto Channel Set when the
aerial cable is not connected properly, "SCAN COMPLETED
-NO SIGNAL-" appears on the screen in step 4. When this
happens, make sure of the aerial connection and press OK;
Auto Channel Set will take place again.
49
PR CH ID PR CH
01 26 BBC1 08
02 33 BBC2 09
03 23 ITV 10
04 30 CH4 11
05 37 CH5 12
06 –––– 13
07 –––– 14
[ 5 ∞
]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
pg. 53). The blueback screen
@ #
button on the
"Delete A
ID
––––
––––
––––
––––
––––
––––
––––