Table of Contents
Advertisement
REAR VIEW
1
1 Mains Power Cord supplies power to recorder.
pg. 6, 7
2 S OUT Connector enables S-VIDEO connection to
TV or second recorder.
3 AV1 IN/OUT Connector enables AV connection to
TV or second recorder; input recordable when "L-1"
selected.
pg. 6, 32
4 AUDIO OUT (L/R) Connectors enable
connection of audio cassette recorder, TV or second
video recorder for dubbing.
5 ANT. IN Connector enables connection of aerial.
pg. 6, 7
DISPLAY PANEL
1 B.E.S.T. Picture System Display lights from bottom to
top while B.E.S.T. is active.
Audio Level Indicator displays audio input and
output levels.
2 Programme Time Indicators show the programme
start time ( ) and the programme stop time ( ) for
timer-recording.
pg. 16
3 Symbolic Mode Indicators
PLAY:
FF/REW VARIABLE
SHUTTLE SEARCH:
4 "Timer" Indicator lights when ‰ has been pressed to
engage Timer mode.
5 Channel Display shows preset position where the
station currently being received is stored.
Clock Display shows current time.
6 S-VHS Indicator lights when a cassette marked S-VHS
is inserted with S-VHS mode set to "AUTO", and when
an S-VHS-recorded tape is played back.
7 Tape Speed Indicators display mode of recording; light
during Record or Play mode.
* EP is only for NTSC playback.
2
S OUT
pg. 7, 32
pg. 37
1
2
3
+ 8
4
0
6
VPS/PDC
15dB
NORM
9
0
!
pg. 20
STILL:
SLOW:
RECORD:
RECORD PAUSE:
pg. 15, 17
pg. 9
pg. 19
pg. 12
3
AV1 OUT
AV1 IN/OUT
COMP. Y/C
AV2 IN
6
7
6 AV1 OUT Switch selects the type of signal output via
the 21 pin AV1 IN/OUT connector.
7 AV2 IN Connector enables connection of satellite
receiver or second recorder; input recordable when
"L-2" selected.
8 Remote PAUSE Connector enables connection to
second recorder equipped with R.A. Edit connector,
or to JVC camcorder equipped with Master Edit
Control, for easy editing.
9 RF OUT Connector enables connection to aerial
terminal of TV receiver.
4
5
6
@
#
8 Instant REVIEW Indicator blinks after timer-recording
and shows how many programmes have been timer-
recorded.
9 Audio Mode Indicator displays audio output mode
currently selected.
0 Tape Remaining Time Indicator displays time remaining
on tape when certain buttons are pressed.
! "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected or power
turned off.
@ PDC Indicator lights when PDC has been engaged
for timer recording.
* VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this recorder.
# Counter shows time elapsed since playback or
recording began.
With
current tape position to end of tape (
Counter, Preset Position*, Clock and Tape Remaining
Time Display appear alternately when DISPLAY
(or – –:– –) is pressed.
* Preset Position is not displayed during playback.
$ Mode shows external input mode selected (L-1, L-2,
F-1 or S-1).
4
5
ANT. IN
R
L
AUDIO
OUT
RF OUT
PAUSE
8
9
pg. 26, 32
pg. 31
pg. 6, 7
7
8
SP
REVIEW
$
pg. 23
pg. 24
pg. 15, 17
displayed, shows time remaining from
53
pg. 6
pg. 13
pg. 13).
Hide quick links:
Advertisement
Table of Contents
