Samsung SH09AWH Service Manual page 13

Set Up the Model Option
Step 3 : Upon completion of the selection, check you made right selections.
Whenever you press the
Step 4 : Pressing the ON/OFF button (
When pressing the operation ON/OFF key with the direction of remote controller for unit, the sound "Ding" is heard and the
OPERATION LED lamp is flickering at the same time, then the input of option is completed. (If the "ding" sound isn't heard,
try again pressing the ON/OFF button.)
Step 5 : Unit operation test-run
First, Remove the battery from the remote controller.
Second, Re-insert the battery into the remote controller.
Third, Press ON/OFF (
• Error Mode
1 st If all lamps of indoor unit are flickering, Plug out, plug in battery again and press ON/OFF key to retry.
2 nd If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if the
correct option code is set up for its model.
12
button, the set Option will be displayed.
)
) key with the direction of remote controller for set.
Samsung Electronics