Cisco Linksys WET610N Quick Installation Manual page 9

Wireless-n ethernet bridge with dual-band

Hide thumbs Also See for Linksys WET610N:

Table of Contents

WET61ON

Wi-Fi Protected Setup

Wi-Fi Protected Setup Button on Router

Use Wi-Fi Protected Setup to

create a wireless connection

between the Bridge and your

router. On your router, press the

button that looks like one of the

icons in the picture. You may

have to hold down this button

until an LED flashes.

Within two minutes, click

Connect on the

Quickly Connect

Using Push Button

screen.

(el

Please wait while the Setup Wizard connects the Bridge to your wireless

network. Warnings from your firewall or security application may

appear. If necessary, click Always allow or Allow this time only to

allow the wireless connection.

You will connect the Bridge

to the device that you want to

equip with wireless.

Click ext.

The Bridge is connected to your

router with a network cable.

Disconnect this network cable

from your router.

If you need to move the device

that you want to equip with

wireless, then do so now. Click

Next.

Wireless-N Ethernet Bridge with Dual-Band

Table of Contents