T-V Link Functions; Satellite Receiver Control Set - JVC HR-J794EU Instructions Manual

B
Select your country
Press rt to place the pointer next to your country, then press OK
or e.
C
Select language
Press rt to place the pointer next to the desired language.
You do not have to press OK; pressing OK enters AUTO SET/T-V
LINK screen.
D
Return to normal screen
Press MENU.

T-V Link Functions

When you connect the recorder to your TV via a fully-wired
21-pin SCART cable, the following functions are available. You
can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired
21-pin SCART cable. The degree of compatibility and available functions
may differ by system.
NexTView Link
You can download the EPG (Electronic Programme Guide)
information from your TV for timer-programming on the recorder.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically
whenever you play a tape.
VCR Auto Standby
You can use your TV's remote control to turn off the recorder.
Direct Rec
You can easily start recording the programme that you are
watching on your TV. When you use this function, set "DIRECT
REC" to "ON". ( 12)

Satellite Receiver Control Set

When you use an optional Satellite Controller and perform the
following settings, you can control your satellite receiver's channel
for timer recording. Approximately 20 seconds before the timer
recording starts, the recorder sets its input mode to "L-2" and the
Satellite Controller switches the satellite receiver's channels.
NOTE:
The Satellite Controller does not function for 24 Hour Express
Timer Programming.
A
Situate Satellite Controller
Place the Satellite Controller so that the path between its
transmitter and the satellite receiver's remote sensor is
unobstructed.
B
Attach Satellite Controller
Fix securely using the adhesive strip attached on the back of the
Satellite Controller.
Your recorder
C
Make connections
Connect the recorder's L-2 IN/DECODER connector to the satellite
receiver's 21-pin SCART connector.
Satellite receiver
Satellite Controller
(not provided)
(suggested locations)
D
Connect Satellite Controller to recorder
Connect the Satellite Controller to the SAT CONTROL connector
on the rear panel.
Transmitter
Satellite Controller
(not provided)
E
Turn on satellite receiver
Turn on the satellite receiver's power.
F
Access Main Menu screen, then Initial Set screen
Press MENU. Press rt to place the pointer next to "INITIAL
SET", then press OK or e.
G
Access Sat Control Set screen
Press rt to place the pointer next to "SAT CONTROL SET", then
press OK or e.
H
Enter satellite receiver's brand
Press the appropriate number keys to enter
the brand code from the following list,
then press OK.
If the code you entered is invalid, the
code field will be reset. Enter the correct
code again.
BRAND NAME CODE
JVC 73
AMSTRAD 60, 61, 62, 63, 92
CANAL 81
SATELLITE
CANAL + 81
D-BOX 85
ECHOSTAR 82
(VIA DIGITAL)
FINLUX 68
FORCE 89
GALAXIS 88
GRUNDIG 64, 65, 102
HIRSCHMANN 64, 78, 99
HUMAX 88
ITT NOKIA 68
KATHREIN 70, 71, 96
LUXOR 68
MASCOM 93
I
Select satellite receiver's channel for testing
Press the appropriate number keys to enter the channel position
on the satellite receiver, then press OK. The recorder enters the test
mode.
J
Check result of the test
If the satellite receiver's channel number
has been changed to the same one as you
set in step 9 9 9 9 ...
Press rt to place the pointer next to
"CHANGED TO ...", then press OK or e
to finish the Sat Control Set mode.
If the satellite receiver's channel number
has not been changed correctly ...
Press rt to place the pointer next to "NOT CHANGED", then
press OK or e. Then perform the procedure again from step 8 8 8 8 .
NOTE:
The Satellite Controller may not function properly with some types
of satellite receiver.
— 5 —
Satellite receiver
21-pin SCART cable
(not provided)
Your recorder
To SAT CONTROL
BRAND NAME CODE
MASPRO 70
NOKIA 87, 94
PACE 65, 67, 74, 86, 92
PANASONIC 74, 92
PHILIPS 66, 84, 101
RADIX 78
RFT 69
SABA 97
SAGEM 83, 90
SALORA 68
SAMSUNG 83
SIEMENS 64
SKYMASTER 69, 98
TECHNISAT 66, 100
THOMSON 97
TPS 83
TRIAX 91
WISI 64
To VCR
connector
To L-2 IN/
DECODER