ENGLISH
Before use, make sure hair is clean, dry and tangle-free.
Plug in the unit, press and hold the on-off switch until the LCD lights up to switch the straightener
on.When the LCD temperature display reaches the desired temperature the styler is ready to use.
For extra protection and best results, section hair prior to straightening and spray with heat
protection spray. Always straighten the lower layers first.
Run the straightener through the entire length of the hair, without stopping.
Repeat only twice per section to prevent hair damage.
Take care not to hold your hand over the temperature setting switches while styling, as this could lead to
altering the temperature by mistake.
Due to the extreme heat capabilities of this styler, extra care should be taken when using.
While heating and cooling, place on flat, smooth, heat-resistant surface. Only hold unit at
the end of the handle.
This is a high performance product, avoid frequent use to prevent damage to hair.
Please note regular use of styling products may deteriorate the coating.
Do not scratch the surface, as this will deteriorate the effectiveness of the coating.
Ensure the unit is unplugged and cool. To maintain the effectiveness of your product wipe
clean after use with a damp cloth. Do not use an abrasive cleaning fluid to clean, as damage
will occur.
2
080748_REM_IFU_S1051_20L.indd GB_2
080748_REM_IFU_S1051_20L.indd GB_2
INSTRUCTIONS FOR USE
IMPORTANT INSTRUCTIONS
CLEANING AND MAINTENANCE
05.11.2008 17:46:15 Uhr
05.11.2008 17:46:15 Uhr