Getting Started; Location; Setting Up - BT CALYPSO 1100 User Manual

Colour screen digital cordless telephone
Hide thumbs Also See for CALYPSO 1100:
Table of Contents

Advertisement

5766 Calypso 1100 UG [4]

Getting started

6
WARNING
Do not place your BT Calypso
1100 in the bathroom or other
humid areas.
Handset range
The handset reception range from
the base is up to 300m outdoors
and up to 50m indoors. Thick walls
can severely affect the range.
Range indicator
The
symbol on your handset
display indicates when you are in
range of the base. If the symbol
flashes and you hear a warning
beep, you are out of range and will
need to move closer to the base.
IMPORTANT
Do not connect the telephone line
until at least one of the handsets is
fully charged.
The base must be plugged into the
mains power at all times.
Which socket?
Power socket
Telephone line socket
01/12/03
11:09
Page 6
BT Calypso 1100 – Edition 04 – 01.12.03 – 5766

Location

You need to place your BT Calypso 1100 within 2 metres
of a mains power and telephone socket so that the
cables will reach.
Make sure it is at least 1 metre away from other
electrical appliances to avoid interference.
Your BT Calypso 1100 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it
as high as possible can help to provide the best signal.

Setting up

1. Plug the mains power cable into the base. Then plug the
power adaptor into the mains wall socket and switch the
power on. The
Power
indicator ( ) on the base lights up.
Power adaptor cable

Advertisement

Table of Contents
loading

Table of Contents