Front Panel Assembly Fig - JVC DX-T99A Service Manual

3.1.16 Removing the cassette A mechanism assembly
(See Fig.23)
• Remove the metal cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the
four screws V and W attaching the cassette A mechanism
assembly.
(2) Disconnect the card wires from the connectors (CN46,
CN47) on the cassette A mechanism assembly.
(3) Take out the cassette A mechanism assembly from the
front panel assembly.
Reference:
Remove the trans shield as required.
3.1.17 Removing the cassette B mechanism assembly
(See Fig.24)
• Remove the metal cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the
four screws V and screw W attaching the cassette B mech-
anism assembly.
(2) Take out the cassette B mechanism assembly from the
front panel assembly.
Reference:
Remove the trans shield as required.
1-22 (No.MB531)
Cassette A mechanism assembly
V
W
CN47
V
Front panel assembly
Fig.23
Front panel assembly
V
W
V
Cassette B mechanism assembly
Fig.24
V
CN46
V
Trans shield
V
V
Trans shield