Table of Contents
Advertisement
Other Functions
Checking tape position
When you change the VCR operation
mode from the stop mode to fast forward
or rewind mode, or when you perform an
Index Search or Instant Review, the tape
position indicator appears.
The position of "
" in relation to "B"
q
(Beginning) or "E" (End) shows you where
you are on the tape.
Set "SUPERIMPOSE" to "ON".(
Changing display information
Each time you press DISPLAY, the display panel
shows the channel number and the clock time
alternatively.
You can change display in the stop, recording or
during rewind/fast-forward.
When "SUPERIMPOSE" is set to "ON"
(
pg. 14) and DISPLAY on the Remote is pressed, time
counter will appear on the TV screen. To reset the time counter,
press C. RESET on the Remote.
Timer warning display
A warning appears on the TV screen to tell
you that the timer-recording is to start in
5 minutes if you are not in the timer
recording standby mode at that time. Press
TIMER to put the VCR into timer recording
standby mode. To clear the display, press
CANCEL on the Remote.
+
+
+
E
B
COUNT
1:23:45
pg. 14)
–WARNING–
TIMER RECORDING
TO START SOON
(CANCEL)
— 13 —
Function settings
You can use the other useful function settings on the Function Set
screen.
A
Access Main Menu screen, then
Function Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to
"FUNCTION SET", then press OK or
B
Select Function
Press
to move the highlight bar (arrow) to the function you
rt
want to set.
FUNCTION
PICTURE CONTROL
NORM
AUTO TIMER
OFF
SUPERIMPOSE
ON
AUTO SP EP TIMER
OFF
VIDEO STABILIZER
OFF
BLUE BACK
ON
NEXT PAGE
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
C
Change setting
Press OK or
. The default setting is bold in the following table.
e
Press MENU to return to normal screen.
PICTURE CONTROL — NORM/EDIT/SOFT/SHARP
This function helps you to adjust the playback picture quality
according to your preference.
NORM: Normally select this. Picture quality is adjusted
automatically.
EDIT: Minimizes picture degradation during editing (recording and
playback).
SOFT: Reduces image coarseness when viewing overplayed tapes
containing much noise.
SHARP: Clearer, sharper-edged picture when viewing images with
much flat, same-colored surfaces such as cartoons.
NOTE:
Select "EDIT" when you are editing tapes. After you finish editing
the tapes, select "NORM".
AUTO TIMER — ON/OFF
When this function is set to "ON":
The timer recording standby mode is automatically engaged when
the VCR is turned off. It is temporarily canceled when the VCR is
turned on. You do not have to press TIMER to engage or disengage
the timer recording standby mode.
When this function is set to "OFF":
You have to press TIMER to engage or disengage the timer
recording standby mode.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
to
rt
.
e
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
2ND AUDIO RECORD
OFF
AUDIO MONITOR
HI-FI
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
Advertisement
Table of Contents
