Index To Parts And Controls - Sony LBT-N455KRW Operating Instructions Manual

Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
87.5 – 108.0 MHz
(50 kHz step)
Aerial FM wire aerial
Aerial terminals 75 ohm unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
AM: 531 – 1,602 kHz
(with the AM tuning
interval set at 9 kHz)
530 – 1,710 kHz
(with the AM tuning
interval set at 10 kHz)
Aerial AM loop aerial
External aerial
terminals
Intermediate frequency
450 kHz
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
40 – 13,000 Hz (±3 dB), using
SONY TYPE I cassette
40 – 14,000 Hz (±3 dB), using
SONY TYPE II cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Amplifier section
Peak music power output:
2,000 W (6 Ω, 10% THD)
Continuous RMS power output:
FRONT SPEAKER:
70 W +70 W (6 Ω at 1 kHz, 5%
THD)
WOOFER SYSTEM:
70 W (6 Ω at 50 Hz, 10% THD)
Inputs
PHONO (phono jack):
Sensitivity 3 mV, impedance
47 kilohms
VIDEO (AUDIO) (phono jack):
Sensitivity 250 mV , impedance
47 kilohms
MIC (phone jack):
Sensitivity 1 mV, impedance
10 kilohms
Outputs
PHONES (phone jack):
accept headphones of 8 ohms or more
FRONT SPEAKER: accept impedance of 6
to 16 ohms
SURROUND SPEAKER:
accept impedance of 8 to
16 ohms
SUPER WOOFER:
accept impedance of 6 to
16 ohms
Speaker system
SS-N355
Speaker system
3-way 4 speakers system
Speaker units
Woofer: 30 cm dia., cone type
Mid range: 10 cm dia., cone type
Tweeter: 5 cm dia., cone type
Super tweeter: 5 cm dia., cone type
Nominal impedance
6 ohms
Dimensions
Approx. 350 × 885 × 350 mm
(w/h/d)
Mass Approx. 15 kg (33 lb 1 oz.)
SS-N455W
Speaker system
1-way speaker system
Speaker units
Woofer: 20 cm dia., cone type
Nominal impedance
6 ohms
Dimensions
Approx. 490 × 445 × 390 mm
(w/h/d)
Mass Approx. 28 kg (61 lb 11 oz.)
Rack system
SU-N455W
Supplied accessories
AM loop aerial (1)
Remote RM-SD50 (1)
Sony SUM-3 (NS) batteries (2)
Rack system SU-N455W
FM wire aerial (1)
Speaker cords (3)
General
Power requirements
220 - 240 V AC, 50/60 Hz
Power consumption
270 w
Dimensions
Approx. 355 × 425 × 400 mm
(14 × 16 × 15
3 3
/ / inches) (w/h/d)
4 4
incl. projecting parts and controls
Mass
Approx. 12.5 kg (27 lb 9 oz.)
Design and specifications subject to change
without notice.
Index to Parts and
Controls
Refer to the pages indicated in parentheses
for details on how to use the controls.
Front Panel
Tuner section
Refer to the pages indicated in parentheses
for details on how to use the controls.
1 SLEEP button (23)
2 SYSTEM POWER switch (7)
3 Remote sensor
4 Display window (30)
5 CURSOR CONTROL buttons (6, 21)
6 TUNING MODE button (12)
7 TUNING +/– buttons (12)
8 TUNER MEMORY button (13)
9 STEREO/MONO button (12)
0 ENTER/NEXT button (6, 9, 21)
!¡ DISPLAY/DEMO button (5, 8, 21)
!™ TUNER/BAND button (12, 18, 24)
!£ REC button (24)
!¢ DAILY 2 button (23)
!∞ DAILY 1 button (23)
!§ TIMER SET button (23)
!¶ CLOCK SET button (6)
Amplifier section
1 PHONES jack (20)
2 EFFECT button/indicator (20)
3 FILE 1 – 5 buttons/indicators (20, 21)
4 FILE SELECT button/indicators (20, 21)
5 VOLUME control (7, 20)
6 DBFB button (20)
7 SURROUND (15, 21)
8 SUPER TWEETER button (20)
9 EQ MEMORY button (22)
!º FUNCTION button (7, 14)
!¡ n UP button (26)
!™ ˜ DOWN button (26)
continue to next page
For Your Information
EN
29