How To Set Up The Time And Date - Honeywell Accenta User Manual

How to Set up Time & Date

How to Set up the Time and Date

LCD Keypad:
• Press [PROG] and then enter your code [0][1][2][3]. The
Day LED goes off to indicate that you are in Programming
mode. The first menu Walk Test appears on the screen.
• Press [4] and the Time and Date Screen appears.
• The Time can be modified in hours, minutes and seconds in
the format HH:MM:SS. The number keys on the keypad 0-9
are used for this function. As each digit is modified the cursor
moves to the next one. When the time is correct press the
[SET] button to accept the change and move to the next
screen or
• To cancel the change press the [RESET] button twice.
• The Date can be changed in day , month, year format DD-MM-
YY. The number keys on the keypad 0-9 are used for this
function. As each digit is modified the cursor moves to the next
one. When the date is correct press the [SET] button to accept
the change or
• To cancel the change press the [RESET] button twice.
LED Keypad:
If required, the time and date can be entered as per the procedure for the LCD keypad. However no informa-
tion will be indicated on the LED keypad. The only indication on the LED keypad that you are in menu 4 Set
up Time and Date is that LED's 1 to 6 on the LED Keypad will be ON.
Accenta/Optima User Guide
0>Walk Test 0>Walk Test 0>Walk Test 0>Walk Test 0>Walk Test
Time and Date Time and Date Time and Date Time and Date Time and Date
Time? Time? Time?
Time? Time?
Time and Date Time and Date
Time and Date Time and Date Time and Date
Date? Date? Date? Date? Date?
4>Set Up 4>Set Up
4>Set Up 4>Set Up 4>Set Up
18
[PROG] then [0][1][2][3]
[4]
1 1 1 1 1 3:46:17 3:46:17 3:46:17 3:46:17
3:46:17
[SET]
1 1 1 1 1 7-05-06 7-05-06 7-05-06 7-05-06 7-05-06
[SET]
Time and Date Time and Date Time and Date
Time and Date Time and Date