To Delete User Code 2 Using User Code 2 - Honeywell Accenta User Manual

How to Delete User Code 2

To delete user code 2 using user code 2

LCD Keypad:
• Press [PROG] and then enter the user 2 [4-digit code] .
The Day LED goes off to indicate that you are in Programming
mode. The first menu Walk Test appears on the screen.
• Press the [8] button on the keypad to edit user code 2.
• Press [OMIT] to delete user code 2.
• The message Code Deleted is displayed on the screen.
• Press [RESET] twice to exit Programming mode. The Day
LED will come on with the screen in Day mode.
LED Keypad:
• Press [PROG] and then enter the user 2 [4-digit code] .
The Day LED goes off to indicate that you are in Programming
mode.
• Press the [8] button on the keypad to edit user code 2. LED's
1-4 are on.
• Press [OMIT] to delete user code 2.
• User code 2 is deleted. LED's 1-4 are off.
• Press [RESET] twice to exit Programming mode. The Day
LED comes on and the Tamper (TA) goes off.
Accenta/Optima User Guide
0>Walk Test 0>Walk Test 0>Walk Test 0>Walk Test 0>Walk Test
Edit Code Edit Code Edit Code Edit Code Edit Code
- - - - - - - -
- - - - - - - - - - - -
Code Deleted Code Deleted Code Deleted
Code Deleted Code Deleted
S u n d a y S u n d a y S u n d a y
S u n d a y S u n d a y
12
[PROG] then [4-digit code]
[8]
[OMIT]
[RESET]
0 1 - J a n 0 1 - J a n 0 1 - J a n
0 1 - J a n 0 1 - J a n
14:10 14:10 14:10 14:10 14:10
[PROG] then [4-digit code]
1 2 3 4 5 6 7 8
Zones
[8]
1 2 3 4 5 6 7 8
Zones
[OMIT]
1 2 3 4 5 6 7 8
Zones
[RESET]
1 2 3 4 5 6 7 8
Zones
ower
Attack
Tamper
Day
ower
Attack
Tamper
Day
ower
Attack
Tamper
Day
ower
Attack
Tamper
Day