G-Code Timer Programming - JVC HR-J635EA Instructions Manual

22
EN
G-Code Timer
Programming
Before performing G-Code timer recording, be sure to read
"G-Code Setup" ( pg. 20).
1
NUMBER
4
7
ADD
CANCEL
SP/LP/EP
To Delay The Stop Time . . .
. . . press ADD after pressing OK in step 3. Each time you press,
the Stop time is delayed by 5 minutes (meaning that 5 minutes
of recording time is added). You can easily compensate for
anticipated programme schedule delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
"9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday–Friday).
6
q
2 3
5 6
8 9
TIMER
0
OK
TIMER RECORDING (cont.)
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
Select the appropriate colour system by pressing the
COLOUR SYSTEM button. (
ACCESS G-CODE SCREEN
1
Press PROG.
ENTER G-CODE NUMBER
2
Press the appropriate
NUMBER keys to enter the
G-Code number.
If you made a mistake,
press CANCEL and enter
the correct G-Code
number.
CHECK INPUT DATA
3
Press OK on the remote
control. The G-Code
Programming screen
appears.
If the G-Code number
you entered is incorrect,
"ERROR" will be
displayed on the screen.
Press CANCEL and enter
the correct G-Code number.
SET TAPE SPEED
4
Press SP/LP/EP.
RETURN TO NORMAL
SCREEN
5
Press OK.
Repeat steps 1–5 for each additional programmes.
ENGAGE TIMER MODE
6
Press TIMER.
pg. 32)
G – CODE
[0–9] =
[PROG./CLOCK] :MENU
G – CODE
1 2 3 4 5 6 7 8
[0–9] =
– P 1 –
G–CODE 123 45678
START STOP
=
21:00 22:00
WEEKLY SP
DATE TV PROG.
25. 12 29
:OK