Table of Contents
Advertisement
SonicWALL EFT DRAFT
The Power LEDs
on the front panel lights up green when you plug in
the SonicWALL NSA E7500. The Alarm
LED might light up and the
Test
LED will light up and may blink while the appliance performs a
series of diagnostic tests. When the Power LEDs are lit and the Test LED is
no longer lit, the SonicWALL NSA E7500 is ready for configuration (this
typically occurs within 90 seconds of applying power).
If the Test or Alarm LEDs remain lit after the SonicWALL NSA E7500 has
booted, restart the SonicWALL NSA E7500.
Alert:
To disconnect power, remove both power cords from the unit.
Page 20
Applying Power to the SonicWALL NSA E7500
Advertisement
Table of Contents
