SonicWALL NSA E7500 Getting Started Manual page 14

Network security appliance

Hide thumbs Also See for NSA E7500:

Table of Contents

EFT DRAFT

The X1 DNS1-3 entries will only be displayed if they have been set from the

Configure menu. If their value is still 0.0.0.0 (default value), they will not appear

in the Status List.

Configure

This option allows you to configure specific aspect of the appliance. Once

selected, the LCD will display a PIN request.

Note:

Default PIN is 76642. PIN number can be changed from the

System > Administration page.

All numbers are inputted using the 4 buttons. Select the individual digit field

using the Left and Right button and select the desired number using the Up

and Down Button. Digits increase incrementally from 0 to 9. Press the Right

button to confirm your PIN and enter the Configuration Menu.

The appliance will remember the PIN number and allow the user to navigate in

and out of the Configuration Menu. However, once the appliance enters Screen-

Saver Mode, whether from the sixty second time out or from pressing the Left

button from the Main Menu, the PIN number will be forgotten and will have to be

inputted again to access the Configuration Menu.

SonicWALL NSA E7500 Getting Started Guide

Page 13

Table of Contents